Prestige APS57C Key Fob Programming Instructions

This Prestige APS57C system uses replacement remote: 103BP, ELVATJA

TO PROGRAM YOUR REMOTE JUST FOLLOW THE STEPS BELOW:

1) Twist the key in the ignition to ON position.
2) Press the valet button/switch 3 times.

Please Note: Some systems may use a combination push-button LED switch; others may use an integrated push-button LED receiver. In these systems the push-button and the dash mounted LED, or the receiver, push-button, LED are one and the same.

3) The LED will flash once, and the siren will chirp once, indicating that the system is ready to accept programming of channel #1 which is arm/lock, disarm/unlock/unlock 2, and panic functions.
4) Press and hold the lock or lock/unlock symbol button of the remote you’re programming for 4 seconds or until a long chirp is heard from the siren. “Repeat step 4 for each remote you wish to program”.

Please Note: If your remote button has the Lock/Unlock icon on one button, press and release the valet push button switch 2 times then move on to step #8.

5) Press the valet button/switch one time to change the channel to channel 2. The siren will chirp twice and the dash mounted LED will Flash twice, indicating that the unit is ready to accept programming for channel # 2 which is only used for separate lock and unlock button remotes, and is the disarm/unlock/unlock 2 and panic.
6) Press and hold the unlock symbol button of the transmitter you wish to program for 4 seconds or until a long chirp is heard from the siren. “Repeat step 6 for each transmitter you wish to program”.
7) Press and release the valet push button switch one time to advance to channel 3.The siren will chirp 3 times and the dash mounted LED will Flash 3 times, indicating that the unit is ready to accept programming for channel # 3 which is the trunk release/alternate output channel of the system.
8) Press and hold the trunk/key symbol button of the transmitter you wish to program for 4 seconds or until a long chirp is heard from the siren. “Repeat step 8 for each transmitter you wish to program”.
9) Press and release the valet push button switch one time to advance to channel 4 if so equipped. The siren will chirp 4 times and the dash mounted LED will Flash 4 times, indicating that the unit is ready to accept programming for channel # 4, optional device (where equipped)
10) Press and hold the Option button of the transmitter you wish to program for 4 seconds or until a long chirp is heard from the siren. “Repeat step 10 for each transmitter you wish to program”.
11) Press and release the valet push button switch one time to advance to channel 5 if so equipped. The siren will chirp 5 times and the dash mounted LED will Flash 5 times, indicating that the unit is ready to accept programming for channel # 5 optional device (where equipped)
12) Press and hold the second Option button of the transmitter you wish to program for 4 seconds or until a long chirp is heard from the siren. “Repeat step 12 for each transmitter you wish to program”.
13) Within 10 seconds, press and release the valet program switch one time. (Siren emits 6 short chirps indicating channel 6 has been entered)
14) Within 10 Seconds, Press and hold the unlock button, (or any unused button(s)), of the first transmitter you wish to control Channel 6 output, (Driver Priority 1) until a long chirp is heard from the siren. (Repeat this for each transmitter you wish to operate the Channel 6 output Driver Priority 1)
15) Within 10 seconds, press and release the valet program switch one time. (Siren emits 7 short chirps indicating channel 7 has been entered)
16) Within 10 Seconds, Press and hold the unlock button (or any unused button(s)) of the first transmitter you wish to control Channel 7 output, (Driver Priority 2) until a long chirp is heard from the siren (Repeat this for each transmitter you wish to operate the Channel 7 output, Driver Priority 2)

If your vehicle’s system was installed without the valet switch you can order one and install it to make it easier to do the programming.

Leave a Reply

Your email address will not be published. Required fields are marked *