Omega K9-FIVE-C Key Fob Programming Instructions

This Omega K9-FIVE-C system uses replacement remote: ELV147, 149-07

Your alarm must be off first before programming this system to the a remote and make sure you have an access to the valet button/switch. The system will automatically exit programming mode if it detects a 15 second period of no activity.

1) Turn the ignition to ON suing your key.
2) Within 7 seconds press the valet button/switch 5 times. The siren should make a long chirp.

One Button Remote:
3) Press the button on your remote. The siren should make a long chirp.
4) Press the valet switch once.
5) Proceed to step 6.

Two button remote:
3) Press the large button on our remote. The siren should make a long chirp.
4) Press both buttons at the same time. The siren should make 2 long chirps.
5) Press the small button on your remote. The siren should make 3 long chirps.

Three button remote:
3) Press the large button on your remote. The alarm should respond with a short siren chirp.
4) Press the small right button on your remote. The alarm should respond with 2 short siren chirps.
5) Press the small left button on your remote. The alarm should respond with 3 short siren chirps.
6) Perform steps 3-5 to program another remote (up to 4 remotes).

If you can’t find your valet switch click here.

Leave a Reply

Your email address will not be published. Required fields are marked *