Code Alarm CATX520 Key Fob Programming Instructions

This Code Alarm CATX520 system uses replacement remote: ELVATEC, ELVATCG

1. Enter the vehicle and turn the ignition key to the ON position.

2. Press and release the programming switch 3 times. The dash mounted LED will flash 1 time and the parking lights will flash 1 time, indicating the system is ready to accept programming for LOCK.

3. Press and hold the LOCK icon button on the transmitter you wish to program for 4 seconds or until you see a long flash of the parking lights. Repeat step 3 for each additional transmitter you wish to program.

4. Turn the ignition key to the OFF position and test the functions on the transmitters.

If your vehicle’s system was installed without the valet switch you can order one and install it to make it easier to do the programming.

Leave a Reply

Your email address will not be published. Required fields are marked *