ATTENTION: Your system can be paired with 4 remote. If you pair another remote while your system’s limit has reached it will start to delete other remotes from it’s memory in a chronological order.
Here’s are the steps to program your new and existing remote:
1. Turn the ignition ON.
2. Press and hold the valet/override button.
3. Within 10 seconds the system will chirp/flash the parking lights (3) times.
4. Press LOCK of each remote you wish to program. The system will respond with 1 chirping for each accepted remote codes.
5. Turn the ignition OFF once you’re done. The system will also turn programming mode off automatically after 15 seconds of inactivity.
ATTENTION: The system only has 1 button programming which programs all channels of the system.
If your vehicle’s system was installed without the valet switch you can order one and install it to make it easier to do the programming.