Code Alarm CA125 Key Fob Programming Instructions

This Code Alarm CA125 system uses replacement remote: ELVATDB, PROTX6

1) Enter the vehicle, and turn the ignition switch to the On position.
2) Press and release the programming button switch 3 times.
3) Press and hold the LOCK button of the transmitter you wish to program.
4)the lights will flash 1 time, indicating that the system accepting the programming of channel#1 which is look.

“Repeat step 3 for each transmitter you wish to program”

5) Press and release the valet push button switch 1 time to advance to channel 2.
6) Press and hold the UNLOCK button of the transmitter you wish to program.
7)The lights will flash 1 time, indicating that system is accepting the programming of channel#2 which is unlock.

“Repeat step 6 for each transmitter you wish to program”

8) Press and release the valet push button switch 1 time to advance to channel 3.
9) Press and hold the TRUNK button of the transmitter you wish to program.
10) The lights will flash 1 time, indicating that the system is accepting the programming of channel#3 which is trunk.
“Repeat step 9 for each transmitter you wish to program”

11) Press and release the valet push button switch 1 time to advance to channel 4.
12) Press and hold the STAR button of the transmitter you wish to program.
The lights will flash 1 time, indicating that the system is accepting the programming of channel #4 which is remote start.

“Repeat step 12 for each transmitter you wish to program”

If you can’t find your valet switch click here.

Leave a Reply

Your email address will not be published. Required fields are marked *