This mode will only retain the last 4 remote transmitters programmed. If the transmitter memory is exceeded, the security system will start deleting transmitters from memory in chronological order. In the event, that you’d need to add or replace a Remote just follow the instructions below.
1. Twist the ignition switch OFF/ON 3 times and stay in ON position.
2. Within 15 seconds press the valet switch/button twice and hold it on your 2nd press until a long chirp is heard. You are now in the programming mode.
3. Press and hold any button on your remote until the siren chirps.
4. If you have an additional remote, just repeat step 3 for each remotes.
NOTE: Twist the key in the ignition to OFF position. Three long chirps and 3 parking light flashes indicates the programming mode is off.
If you can’t find your valet switch click here.