Automate AM9 Key Fob Programming Instructions

This DEI Automate AM9 system uses replacement remote: 473A, EZSDEI474V

You can check the owner’s wallet card to find out which system (ignition or start) was installed in your vehicle.

STARTER:

1. Turn the key to the start position. if the vehicle does not start then proceed to step 3. If the vehicle starts then the starter kill system is not armed. proceed to step 2.
2. Turn key off and wait for 40 seconds. Turn the key to the start position and the vehicle should not start.
3. Turn the key OFF and then cycle the key from off to start position 3-times within 5 seconds and then hold in the start position on the 4th turn.
4. Press button 1 on the transmitter within 5 seconds (the starter cranks). If you’re adding remotes just repeat steps from 1 to 4.
5. Turn the key OFF and wait 30 seconds. Press transmitter button 1, turn the key to start, the vehicle should not start. Test transmitter button 2. Turn the key to ignition and press transmitter button 2. Turn the key to start. the vehicle should crank and start.

IGNITION:

1. Turn the key to the ignition position. if the power is present, then the ignition kill system is not armed. If no power is present proceed to step 3.
2. Turn key off and wait for 40 seconds. Turn the key to the ignition position again. Power should be present.
3. Turn the key OFF and then cycle the key from off to ignition position 3-times within 5 seconds and then hold in the ignition position on the 4th turn.
4. Press button 1 on the transmitter within 5 seconds (ignition has power). If you’re adding remotes just repeat steps from 1 to 4.
5. Turn the key OFF and wait 30 seconds. Press transmitter button 1, turn the key to ignition position. The ignition should not have power. Test transmitter button 2. Turn the key to ignition and press transmitter button 2. Turn the key to start. the vehicle should crank and start.

If you can’t find your valet switch click here.

Leave a Reply

Your email address will not be published. Required fields are marked *