2011 Buick Lucerne Key Fob Programming Instructions

This keyless remote programming instructions work for L,U,T,P remote with part # 20935330, 10337866, 15859329, 15912859, 20833561, 22952177 FCC id OUC60270, OUC60221 on the back of it.

Replacement Remote 20935330, 10337866, 15859329, 15912859, 20833561, 22952177, OUC60270, OUC60221
Replacement Remote
Put the key in the ignition and turn it to ON position. (Don’t start the engine) so you can access the (DIC)
Follow all steps below to program the remote.
1. Press the vehicle information button until the “Press (check) to reprogram a remote” displays.
2. Press the set/reset button until the Remote Programming Active is displayed.
3. Press and hold LOCK and UNLOCK on the remote simultaneously for 15 seconds. On vehicles with the memory recall seats, the first remote programmed will be driver 1 and the second will be driver 2 and so on. You’ll hear a chrime which indicates the remote has been programmed.
4. If you’re programming another (a maximum of 8) remote just go back to step 3.
5. To turn the programming mode off just twist the key to Lock then back to Off position in the ignition.

1 thought on “2011 Buick Lucerne Key Fob Programming Instructions”

  1. These instructions don’t fit my 2011 Buick Lucerne CXL Premium – “Press (check) to reprogram a remote” does NOT come up by scrolling through the info button choices….

Leave a Reply

Your email address will not be published. Required fields are marked *