This keyless remote programming instructions work for L,U Square in half circle remote with part # 88036-FE041 FCC id NHVWB1U711 on the back of it.
1. Look for the 8 digit number on the circuit board (you will need to open the remote) or the remote and write it down as you will be needing it (check steps 7 and 8).
2. Close all doors including trunk.
3. Open the driver door one more time and close it back.Â Do these in 45 seconds:
5. Insert the key in the ignition and twist it from LOCK to ON 10 times within 15 seconds. You’ll hear a tone once and buzzer. The interior light flashes until the remotes are programmed in the system
6. Within 15 seconds open the driver door and close. You’ll hear a tone 30 seconds.
8. After putting all 8 digits, within 5 seconds press UNLOCK and repeat step 6 all over again. After the 8th digit a tone will sound for 30 seconds.
10. To exit programming mode just remove the key from the ignition.Â