2007 Cadillac Srx Key Fob Programming Instructions

This keyless remote programming instructions work for 4B (L,U,RG,P) remote with part # 22951508, 22756460, 20869054, 25830632, 15916015, 15913416, 15857835 FCC id OUC60270, OUC60221 on the back of it.

Replacement Remote 22951508, 22756460, 20869054, 25830632, 15916015, 15913416, 15857835, OUC60270, OUC60221
Replacement Remote
Insert the ignition key and turn to the ON position (position just before you crank the vehicle) so you can access the (DIC)
The figure on top will be your guide when programming the remote.
1. Press the vehicle information button until the “Press (check) to reprogram a remote” displays.
2. Press the set/reset button until the Remote Programming Active is displayed.
3. Press and hold the lock and unlock buttons on the first transmitter at the same time for about 15 seconds. On vehicles with the memory recall seats, the first
transmitter learned will match driver 1 and the second will match driver 2. A chime will sound indicating that the transmitter is matched.
4. If you’re programming another (a maximum of 8) remote just go back to step 3.
5. To turn the programming mode off just twist the key to Lock then back to Off position in the ignition.

Leave a Reply

Your email address will not be published. Required fields are marked *