This keyless remote programming instructions work for isuzu remote with FCC id BAB237131-013, on the back of it.
 |
| Replacement Remote |
1. Remove the driver’s side lower dashboard panel to access the keyless entry brain.
2. Turn the ignition to ON.
3. Press and hold the green programming button on the side of the unit with a pen or pencil. You will have to poke through a hold about the size of a pencil located on the side. When the exterior or LED lights go on, release the programming button.Do step 4 within 5 seconds of step 3.
2. Turn the ignition to ON.
3. Press and hold the green programming button on the side of the unit with a pen or pencil. You will have to poke through a hold about the size of a pencil located on the side. When the exterior or LED lights go on, release the programming button.Do step 4 within 5 seconds of step 3.
4. Press and release the top button on the remote. Check that the LED goes out, the siren chirps, and the front lights flash to confirm that the remote has been accepted.
5. If you have other remotes to program repeat steps 3 and 4.
6. Turn the ignition to OFF.
5. If you have other remotes to program repeat steps 3 and 4.
6. Turn the ignition to OFF.
