This keyless remote programming instructions work for remote with part # 95411-3A200, 95400-2D101, 95411-2D100, and FCC id OSLOKA-510T on the back of it.
![]() |
Replacement Remote |
1. Locate alarm system control module located behind fascia panel in center.
2. Ensure memory switch is in OFF position. Switch ignition to ON. Wait 5 seconds.Set memory switch to set position.
2. Ensure memory switch is in OFF position. Switch ignition to ON. Wait 5 seconds.Set memory switch to set position.
3. Press LOCK button on the remote you wish to program. Press LOCK button on a second remote if there is any.
4. Set memory switch to OFF position. Switch ignition to OFF.
4. Set memory switch to OFF position. Switch ignition to OFF.