2000 Chevrolet Impala Key Fob Programming Instructions

This keyless remote programming instructions work for used to be 2070, 2220, 2221, 2230, 2231, 2240 remote with part # 15732805, 25656444, 25656445, 25665574, 25665575, 25628814, 25668603, 25678792 FCC id KOBUT1BT on the back of it.

Replacement Remote 15732805, 25656444, 25656445, 25665574, 25665575, 25628814, 25668603, 25678792, KOBUT1BT
Replacement Remote
1. Turn ignition switch to ON or ACC position and turn radio off. Press and hold the DISP button on radio for at least 5 seconds until SETTINGS is displayed. Using SEEK up or down arrow keys, scroll until FOB PROG appears on display. Press PREV or NEXT button to enter lower menu. Begin will be displayed.
2. Press DISP button to start programming. When PUSH FOB message flashes, press and hold LOCK and UNLOCK button on remote for 15 seconds. A chime will be heard to indicate remote has been learned.
3. Repeat step 2 for each remote including previously programmed remotes.
4. Scroll until EXIT appears in display. Press DISP button to exit programming mode. A chime will verify exit.

Leave a Reply

Your email address will not be published. Required fields are marked *