This keyless remote programming instructions work for L,U (RED LED) remote with part # XT-54AÂ and FCC id B23AT54Â on the back of it.
![]() |
Replacement Remote |
1. Find the keyless entry module located underneath the driver’s side dash.
2. Using a small diameter object push down on the push switch located next to the red LED, until the LED begins to flash indicating that the vehicle is in programming mode.
2. Using a small diameter object push down on the push switch located next to the red LED, until the LED begins to flash indicating that the vehicle is in programming mode.
3. Press and release the LOCK button on the remote. The red LED will respond by lighting solid momentarily. After a few seconds the LED will begin to flash again.
4. Within 5 seconds repeat step 3 on the second remote (if any, including old remotes.)
4. Within 5 seconds repeat step 3 on the second remote (if any, including old remotes.)