1999 Mazda Protege Key Fob Programming Instructions

This keyless remote programming instructions work for  remote with FCC id KPU41015 on the back of it.

Replacement Remote KPU41015
Replacement Remote
ATTENTION: Program all remote (including old ones) since the system will reset once it enters programming mode (See step 8).

1. Don’t put any keys in the ignition.
2. Close all doors.
3. Leave the driver’s door open.
4. Put the key in the ignition this time, turn it ON and back to OFF then remove it.

5. Repeat step 4 twice. Make sure you remove key from ignition each time.
6. Press the driver door frame button 3 times (black rubber button in driver door frame that tells whether the door is open or closed.) If can’t find this button just open and close the door 3 times instead.
7. Door locks will cycle (lock then unlock) or a chime will sound which means system has is in program mode. If not, wait 40 seconds and start from the top.
8. Push any button on the remote twice. Door locks will cycle or you’ll hear a chime which means remote is programmed. Push any button on each remote twice to program them.
9. Wait 15 seconds or until you hear four chimes. This means the system will turn programming mode off itself.

Leave a Reply

Your email address will not be published. Required fields are marked *