This keyless remote programming instruction works on this remote with part # 56045497AA, 56045497AB, 56045497AC, and FCC id GQ43VT9T
![]() |
Replacement Remote |
1. Turn ignition to RUN, don’t start the engine. And wait for chimes to stop.
2. Using any existing (working) remote, press the UNLOCK button for 4 to 10 seconds.
2. Using any existing (working) remote, press the UNLOCK button for 4 to 10 seconds.
3. Within the specified 4 to 10 seconds, continue pressing the [UNLOCK] button and
press the [PANIC] button for 1 second and release both buttons. A chime will sound to indicate that the transmitter programming mode has been entered (give 3 seconds for chime to sound).
press the [PANIC] button for 1 second and release both buttons. A chime will sound to indicate that the transmitter programming mode has been entered (give 3 seconds for chime to sound).
4. Within 30 seconds press any button on all remotes to be programmed including previously programmed remotes. A chime sounds after each remote is programmed.
5. Turn OFF the ignition.
5. Turn OFF the ignition.