1997 Plymouth Neon Key Fob Programming Instructions

This keyless remote programming instructions work for Disc. By dealer: use 3171 remote with part # 56021903AA, 04686366AA, 4686076, 56008761, 56008762, FCC id GQ43VT7T on the back of it.

Replacement Remote 56021903AA, 04686366AA, 4686076, 56008761, 56008762, GQ43VT7T
Replacement Remote
1. Locate the keyless entry programming wire- a dark green wire with a red molded plastic connector on the end. The program wire can be found from the upper edge of the passenger side cowl trim panel.
2. Connect the program wire to a ground with suitable jumping wire to enter programming mode.
3. Turn the ignition to the ON position.
4. Press any button on the transmitter you want to program. If there is a second remote press any button on that one too.
5. Disconnect program wire from ground to exit programming mode.

Leave a Reply

Your email address will not be published. Required fields are marked *