1997 Oldsmobile Achieva Key Fob Programming Instructions

This keyless remote programming instructions work for 3B remote with part # 16245103, trunk 16245105, rear2x 16245100-29, 16207901-5, FCC id AB01502T on the back of it.

Replacement Remote 16245103, 16245105, 16245100-29, 16207901-5, AB01502T,
Replacement Remote

1. Ignition OFF.
2. Look for the programming connector found in the drivers side trunk. It is a plastic connector with 2 wires leading to it and unplugged.

3. Connector should have atleast one terminal should be ground to the trunk batch or bolt using a jumper wire. Door locks should cycle (lock and unlock) indicating your system is in programming mode.
4. Press and hold lock and unlock button on the remote at the same time for 10 seconds or until you hear the door locks cycle. Remote has been programmed but others are deleted from the memory.
5. Repeat step 3 to reprogram another/existing remotes.
6. Remove the jumper wire once all remotes are programmed. This will turn off the programming mode and permanently save all remote codes in it’s memory until you program another remote in the future.

Leave a Reply

Your email address will not be published. Required fields are marked *