1996 Suzuki X-90 Key Fob Programming Instructions

This keyless remote programming instructions work for 1B (RED LED) remote with part # 99980-46060-002 FCC id H5O600-2 on the back of it.

Replacement Remote 99980-46060-002, H5O600-2
Replacement Remote

1. Press/flip the valet button/switch ON.
2. Put the key in the ignition and turn it to ON then back to OFF.
3. Press/flip the valet button/switch OFF and ON 2 times ending in OFF. You’ll get a chirp after that which means the is about to enter programming mode.
4. Turn the key to ON and OFF twice ending in OFF in the ignition. You’ll get another chirp indicating the system is in programming mode.

5. Push the green button on remote #1. Within 5 seconds push the green button on remote #2 (if any). You will hear chirps each time you program a remote.
6. After 5 seconds programming mode ends by itself.

Leave a Reply

Your email address will not be published. Required fields are marked *