1996 Plymouth Voyager Key Fob Programming Instructions

This keyless remote programming instruction works on this remote with part # 56021903AA, 04686366AA, 4686076, 56008761, 56008762, 05014736AA FCC id GQ43VT7T, GQ43VT9T

Replacement Remote 56021903AA, 04686366AA, 4686076, 56008761, 56008762, 05014736AA, GQ43VT7T, GQ43VT9T
Replacement Remote
1. Turn ignition to run position (as far as it goes without starting engine). Wait for chimes to stop.
2. Using any original (working) transmitter, press the [UNLOCK] button for 4 to 10 seconds.
3. Within the specified 4 to 10 seconds, continue pressing the [UNLOCK] button and press the [PANIC] button for 1 second and release both buttons. A chime will sound to indicate that the transmitter programming mode has been entered (allow 3 seconds for chime to sound).
4. Within 30 seconds of chime press a button on all remotes to be programmed including previously programmed remotes. A chime sounds after each remote is programmed.
5. Turn the ignition to OFF.

Leave a Reply

Your email address will not be published. Required fields are marked *