1996 Infiniti Q45 Key Fob Programming Instructions

This keyless remote programming instructions work for INFINITI 4B DOME LIGHT remote with part # 28268-49U10, FCC id A269ZUA073 on the back of it.

Replacement Remote 28268-49U10,  A269ZUA073
Replacement Remote
IMPORTANT: Before entering programming mode, have in possession all of the transmitters you
will be using on the vehicle. Once you program the transmitter, all previous codes will be erased from the memory. The other transmitters will not be functional until you program the transmitters again.

1. Open the trunk.
2. Close and lock all doors with power door lock on the driver’s door.
3. Put the key in ignition and remove it 6 times within 10 seconds. Make sure withdraw the key completely each time.

4. Manually unlock and lock the driver door once with the manual knob. 5. Within 5 seconds push the LOCK button on the remote.
6. If there are any other remotes you wish to program including your old ones then repeat step 4 and 5 for each remote. You may program up to 4 remotes.
7. Unlock driver’s door with manual lock knob, 
open driver’s door and close it. 

Leave a Reply

Your email address will not be published. Required fields are marked *