This keyless remote programming instruction works on this remote with part # 56021903AA, 04686366AA, 4686076, 56008761, 56008762, 05014736AA, and FCC id GQ43VT7T, GQ43VT9T
![]() |
Replacement Remote |
1. Twist the key in the ignition to ON and make sure you didn’t start the engine. Then wait for chimes to stop.
2. Press the UNLOCK button for 4 to 10 seconds ssing the existing (working) remote.
2. Press the UNLOCK button for 4 to 10 seconds ssing the existing (working) remote.
3. Within that 4 to 10 seconds, continue pressing the UNLOCK button then press the PANIC button for 1 second and release both buttons. A chime will sound to indicate that you’re in programming mode. Leave the chime for 3 seconds.
4. Within 30 seconds press any button on all remotes to be programmed including existing (programmed) remotes. A chime sounds for each remotes you’re programming.
5. Turn the ignition OFF position to end the programming mode.
5. Turn the ignition OFF position to end the programming mode.