1995 Plymouth Voyager Key Fob Programming Instructions

This keyless remote programming instructions work for  remote with part # 04688527, 04759136, AB, 04759136, 04469341, AB, 04469341, FCC id GQ43VT5T, GQ43VT7T on the back of it.

Replacement Remote 04688527, 04759136, AB, 04759136, 04469341, AB, 04469341, GQ43VT5T, GQ43VT7T
Replacement Remote
1. Open and lower the glove box door.
2. Locate the keyless entry program line – a dark green wire with red molded plastic insulator on the end. The program line is located behind the lower end of the glove box. Make sure you know which is the program line.
3. Turn the ignition to the ON position.
4. Connect the program line from the Remote Keyless Entry Module to ground with a suitable jumper wire. The door locks will lock and unlock automatically to indicate you have entered programming mode.
5. Press any button on a remote to have it learned. The door locks cycle to confirm. If  you have a second remote press any button at this time (door locks cycle again.)
6. Disconnect the program line from ground to exit programming mode.

Leave a Reply

Your email address will not be published. Required fields are marked *