This keyless remote programming instructions work for 2B remote with part # 15725422, 15955701, FCC id ABO0104T, on the back of it.
 |
| Replacement Remote |
1. Put the key in the ignition. (Don’t turn it)
2. Look for the Data Link Connector (DLC) under driver’s side dashboard. Use the figure below to find the A and G pins.
2. Look for the Data Link Connector (DLC) under driver’s side dashboard. Use the figure below to find the A and G pins.
3. Connect pins A and G of the DLC with a suitable electric wire. Receiver will respond by locking and unlocking doors within 2 seconds.
4. Press the UNLOCK button on the first remote to be programmed. Vehicle will respond by locking and unlocking the doors.
4. Press the UNLOCK button on the first remote to be programmed. Vehicle will respond by locking and unlocking the doors.
5. Press UNLOCK button on second remote to be programmed. Vehicle will respond by locking and unlocking the doors.
6. Disconnect jumper wire between pins A and G.
6. Disconnect jumper wire between pins A and G.