This keyless remote programming instructions work for 3B remote with part # 88959920, 10205241, 10205239, 10205240, 12522338, 10063533, 10205239, 12522337, 12522339, 12522356, 10097895, 10097894, 10205674, 10092854, 10097894, 10063534, 10178738, and FCC id ABO0103T, GQ43VT1, ABO0104T, ABO0116T, and part # 218 K1200 on the back of it.
1. Look for the the Programming Connector in the passenger side trunk. It’s a plastic connector with one wire leading to it. You may have to pull back the trim to access the connector.
2. The programming connector should have one terminal. Ground this terminal to the trunk hatch or antenna. Door locks should cycle (lock and unlock) which means you’ve entered programming mode. Let the programming connector stays grounded until step 5.
4. Tp program another remote just press any buttons on it.Then the door locks will cycle to indicate it has been programmed.
5. To exit programming mode just Remove the ground of programming terminal.