1994 Suzuki Samurai Key Fob Programming Instructions

This keyless remote programming instructions work for 1B (RED LED) remote with part # 99980-46060-002 FCC id H5O600-2 on the back of it.

Replacement Remote 99980-46060-002, H5O600-2
Replacement Remote

1. Flip the valet/overide switch (located under driver’s side dash) to
the ON position.
2. With the key in the ignition turn the ignition to ON then OFF.

3. Press/flip the valet button/switch OFF then ON, OFF, ON, OFF. After that, you
will hear a chirp telling you the system is about to enter program mode.
4. Twist the key in the ignition ON and OFF twice ending in OFF. Another chirp will
sound which means you’re now in programming mode.

5. Program your remote by pressing the green button on the first remote. And within
5 seconds do the same thing to the other ones. You’ll get a chirp each time you do
this to a remote which means it has been programmed.
6. In 5 seconds of no activity the system will turn the program mode automatically.

Leave a Reply

Your email address will not be published. Required fields are marked *