1992 Oldsmobile Silhouette Key Fob Programming Instructions

This keyless remote programming instructions work for 2B LUMINA APV remote with part # 10286021, FCC id ABO0203T on the back of it.

Replacement Remote 10286021, ABO0203T
Replacement Remote
1. Remove your glove box.
2. Vehicle Ignition must be in the “ON” position.
3. Momentarily depress the “Program” switch on the receiver (accessed through a hole on top of the glove box) and it will acknowledge successful entry into programming mode by locking then unlocking the vehicle doors.

4. Within 10 seconds, press any button on the first transmitter to program it. The receiver shall then acknowledge successful programming by locking then unlocking the vehicle doors.
5. Within 10 seconds, repeat step 4 to program the next transmitter (if any, including your old one).

6. Wait 10 seconds after the last transmitter has been programmed and turn the Ignition Switch “OFF”.
7. Test transmitter(s) for function.

Leave a Reply

Your email address will not be published. Required fields are marked *