This keyless remote This keyless remote programming instructions work for (2060) 3B remote with part # 15692636, 15955515, 15955516, 25609144, 25555951, 15692336, 10239647, 25559364, 25609144, 15657587, 15955702, 15725423, new 15731442, FCC id ABO0103T, ABO0104T on the back of it.
1. Locate the Data Link Connector (DLC) Underneath the drive’r side dashboard. Use diagram to the right as a map for your DLC (they usually aren’t letterd). The view in the picture is looking straight into the cavities of the DLC.
2. Ground pin G on the Data Link Connector (DLC) with suitable electrical wire. Receiver will respond by locking and unlocking doors
3. Press any button of the first transmitter to be programmed. The control module will respond by locking/unlocking doors and activating rear window release.
4. Press any button of the second transmitter to be programmed (if used). The control module will respond by locking/unlocking doors activating the rear window release.5. Remove the ground applied to pin G of the Data Link Connector (DLC).