This keyless remote programming instructions work for (2060) 3B remote with part # 15692636, 15955515, 15955516, 25609144, 25555951, 15692336, 10239647, 25559364, 25609144, 15657587, 15955702, 15725423, new 15731442, FCC id ABO0103T, ABO0104T on the back of it.
![]() |
Replacement Remote |
1. Locate the Data Link Connector underneath the driver side dashboard. Use the diagram to identify the pins.
2. Ground pin G of the DLC. The receiver will respond by locking and unlocking the doors within 2 seconds.
3. Press any button on the first remote to be programmed. The door locks will cycle again.
4. Repeat step 3 for an additional remote (if any). The door locks will cycle again.
5. Remove the ground applied to pin G.
2. Ground pin G of the DLC. The receiver will respond by locking and unlocking the doors within 2 seconds.
3. Press any button on the first remote to be programmed. The door locks will cycle again.
4. Repeat step 3 for an additional remote (if any). The door locks will cycle again.
5. Remove the ground applied to pin G.