This keyless remote programming instructions work for remote with part # 25602667, 68, 69 FCC id ABO0303T, ABO0302T and part # ABO91CH, 25550780, on the back of it.
 |
| Replacement Remote |
1. Insert the key in ignition and leave in the OFF position.
2. Locate the Data Link Connector (DLC) under driver’s side dashboard. Use the
figure below to find the A and G pins.
2. Locate the Data Link Connector (DLC) under driver’s side dashboard. Use the
figure below to find the A and G pins.
3. Connect pins A and G of the DLC with a suitable electric wire. Receiver will
respond by locking and unlocking doors within 2 seconds.
4. Press the UNLOCK button on the first remote to be programmed. Vehicle will
respond by locking and unlocking the doors.
respond by locking and unlocking doors within 2 seconds.
4. Press the UNLOCK button on the first remote to be programmed. Vehicle will
respond by locking and unlocking the doors.
5. Press UNLOCK button on second remote to be programmed. Vehicle will respond
by locking and unlocking the doors.
6. Disconnect jumper wire between pins A and G.
by locking and unlocking the doors.
6. Disconnect jumper wire between pins A and G.